検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 88 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

報告書

HTTR1次ヘリウム循環機フィルタの差圧上昇事象,1; 差圧上昇事象の原因調査

根本 隆弘; 荒川 了紀; 川上 悟; 長住 達; 横山 佳祐; 渡部 雅; 大西 貴士; 川本 大樹; 古澤 孝之; 猪井 宏幸; et al.

JAEA-Technology 2023-005, 33 Pages, 2023/05

JAEA-Technology-2023-005.pdf:5.25MB

HTTR (High Temperature engineering Test Reactor) RS-14サイクルの原子炉出力降下において、ヘリウムガス循環機のフィルタ差圧が上昇傾向となった。この原因を調査するため、1次ヘリウム純化設備のガス循環機の分解点検等を実施した結果、ガス循環機内のシリコンオイルミストがチャコールフィルタの性能低下で捕集できなくなり、1次系統に混入したためと推定された。今後は、フィルタ交換を実施するとともに、さらなる調査を進め、再発防止対策を策定する予定である。

論文

Origin of Cs-bearing silicate glass microparticles observed during Fukushima accident and recommendations on nuclear safety

日高 昭秀

Journal of Radioanalytical and Nuclear Chemistry, 332, p.1607 - 1623, 2023/03

 被引用回数:0 パーセンタイル:0.01(Chemistry, Analytical)

福島第一原子力発電所事故時に初めて放出されたタイプA Cs含有微粒子(以下、タイプA)の生成機構について、これまで様々な生成機構説が議論されてきた。筆者は、3号機の非常用ガス処理系(SGTS)のHEPAフィルタが水素爆発時に溶融して微粒化したことにより生成したと考えた。しかし、その仮説は、熱水力と大気拡散及びその学際領域にも及んで複雑であり、まだ推論が多く含まれている。このため、今後は様々な専門家による検証や、タイプA生成に関する再現試験が必要と考えた。さらに、もし仮説が正しいとした場合、HEPAフィルタは安全上重要な機器であり、水素爆発防止対策やHEPAフィルタの設計等にも影響するかもしれないと考え始めていた。そこで、これらの検討を進めるため、タイプAの生成機構に関して、総合的に解説したレビューが必要との結論に至った。本稿では、筆者がこれまでに執筆した論文等に基づき、仮説の根拠、検証及びその仮説が正しいとした時に実際に何が起こったと考えられるか、今後の課題、原子力安全性の更なる向上の観点からの提言について述べる。

報告書

JRR-3、JRR-4及び再処理特別研究棟から発生した放射性廃棄物に対する放射化学分析

飛田 実*; 今田 未来; 大森 剛*; 生天目 勉*; 鬼澤 崇*; 黒澤 勝昭*; 原賀 智子; 青野 竜士; 水飼 秋菜; 土田 大貴; et al.

JAEA-Data/Code 2022-007, 40 Pages, 2022/11

JAEA-Data-Code-2022-007.pdf:1.99MB

日本原子力研究開発機構の研究施設等から発生する放射性廃棄物は、放射能レベルに応じて将来的に浅地中埋設処分される予定であり、埋設処分を開始するまでに、廃棄体の放射能濃度を評価する方法を構築する必要がある。そこで、原子力科学研究所バックエンド技術部では、研究施設等廃棄物に対する放射能濃度評価方法の検討に資するため、JRR-3、JRR-4及び再処理特別研究棟から発生した放射性廃棄物よりコンクリート、焼却灰、セラミックフィルタ及び耐火レンガを試料として採取し、放射化学分析を実施した。本報告書は、令和2年度から令和3年度に取得した24核種($$^{3}$$H、$$^{14}$$C、$$^{36}$$Cl、$$^{41}$$Ca、$$^{60}$$Co、$$^{63}$$Ni、$$^{90}$$Sr、$$^{94}$$Nb、$$^{99}$$Tc、$$^{rm 108m}$$Ag、$$^{129}$$I、$$^{137}$$Cs、$$^{133}$$Ba、$$^{152}$$Eu、$$^{154}$$Eu、$$^{rm 166m}$$Ho、$$^{234}$$U、$$^{238}$$U、$$^{238}$$Pu、$$^{239}$$Pu、$$^{240}$$Pu、$$^{241}$$Am、$$^{243}$$Am、$$^{244}$$Cm)の放射能濃度データについて整理し、放射能濃度評価法検討のための基礎資料としてまとめたものである。

論文

Clogging properties of HEPA filter induced by loading of soot from burned glove-box panel materials

田代 信介; 大野 卓也; 天野 祐希; 吉田 涼一朗; 渡邉 浩二*; 阿部 仁

Nuclear Technology, 208(10), p.1553 - 1561, 2022/10

 被引用回数:1 パーセンタイル:0.01(Nuclear Science & Technology)

グローブボックス(GB)火災における放射性物質の閉じ込め安全性の評価に寄与するために、代表的なGBパネル材料であるポリメチルメタクリエート(PMMA)およびポリカーボネート(PC)の燃焼試験を比較的大型の試験装置を用いて行った。閉じ込め安全性を評価するための重要なデータとして、燃焼物質から発生した煤煙の放出割合と粒径分布を得た。さらに、煤煙負荷による高性能エア(HEPA)フィルタの差圧($$Delta$$P)の上昇も検討した。その結果、PCからの煤煙の放出割合はPMMAの場合よりも約7倍大きかった。さらに煤煙粒子の体積負荷の効果を考慮することにより、煤煙負荷体積量が低い領域における差圧の上昇挙動は、燃焼物質の種類によらず統一的に表現できる可能性を見出した。

論文

Identification of carbon in glassy cesium-bearing microparticles using electron microscopy and formation mechanisms of the microparticles

日高 昭秀

Nuclear Technology, 208(2), p.318 - 334, 2022/02

 被引用回数:6 パーセンタイル:64.12(Nuclear Science & Technology)

福島第一原子力発電所事故時に放出されたガラス状セシウム含有微粒子(タイプA)の生成機構として、著者は、以前、3号機の水素爆発時に、非常用ガス処理系(SGTS)のHEPAフィルタのガラス繊維が溶融し微粒化したことが原因である可能性を指摘した。この仮説が正しければ、ガラス繊維には炭素を含むバインダが塗布され、その近くには活性炭フィルタがあるため、623K以上で自然発火する炭素は、水素爆発の短い加熱期間中に燃焼し切らず、タイプAの中またはタイプAの近くに残っている可能性がある。従来の類似研究は、粒子固定用に炭素テープを用いていたため炭素の同定が困難であった。そこで、本研究では炭素以外のテープと電子プローブマイクロアナライザ(EPMA)を用いて測定を行った。その結果、タイプAはバインダ由来の炭素を含み、タイプAに付随する非球形粒子やタイプAを覆う被膜には、活性炭フィルタ起源と考えられる炭素を含むことを確認した。この結果は、従来の生成機構では説明できず、著者が提案した仮説によって説明可能である。タイプAの生成機構を決定するのは時期尚早かもしれないが、本情報は生成機構の温度条件を制限するのに有用と考えられる。

論文

GPU optimization of lattice Boltzmann method with local ensemble transform Kalman filter

長谷川 雄太; 今村 俊幸*; 伊奈 拓也; 小野寺 直幸; 朝比 祐一; 井戸村 泰宏

Proceedings of 13th Workshop on Latest Advances in Scalable Algorithms for Large-Scale Heterogeneous Systems (ScalAH22) (Internet), p.10 - 17, 2022/00

格子ボルツマン法(LBM)に基づく数値流体力学シミュレーションおよび局所アンサンブル変換カルマンフィルタ(LETKF)によるアンサンブルデータ同化をNVIDIA A100 GPU搭載スパコンに対して実装し、および最適化した。LBMとLETKFの協働のため、データ転置通信を実装し、LETKFのデータ依存性に基づいて計算,ファイルI/O、および通信のオーバーラップにより通信を最適化した。2次元等方乱流,アンサンブル数$$M=64$$,格子点数$$N_x=128^2$$の条件において、通信を最適化した実装は、LETKFを並列化しない単純な実装に対して3.85倍の高速化を達成した。LETKFの主要な計算カーネルは$$Mtimes M$$の実対称密行列の固有値分解であり、その計算のため、バッチ形式固有値分解ソルバEigenGを新たに開発した。EigenGによるバッチ形式固有値分解は、既存ライブラリであるcuSolverに対して64倍の高速化を達成した。

報告書

レーザー共鳴イオン化を用いた同位体存在度の低いストロンチウム90の迅速分析技術開発(委託研究); 平成30年度英知を結集した原子力科学技術・人材育成推進事業

廃炉国際共同研究センター; 東京大学*

JAEA-Review 2019-027, 70 Pages, 2020/01

JAEA-Review-2019-027.pdf:5.18MB

日本原子力研究開発機構(JAEA)廃炉国際共同研究センター(CLADS)では、平成30年度英知を結集した原子力科学技術・人材育成推進事業(以下、「本事業」という)を実施している。本事業は、東京電力ホールディングス福島第一原子力発電所の廃炉等をはじめとした原子力分野の課題解決に貢献するため、国内外の英知を結集し、様々な分野の知見や経験を、従前の機関や分野の壁を越えて緊密に融合・連携させた基礎的・基盤的研究及び人材育成を推進することを目的としている。平成30年度の新規採択課題から実施主体を文部科学省からJAEAに移行することで、JAEAとアカデミアとの連携を強化し、廃炉に資する中長期的な研究開発・人材育成をより安定的かつ継続的に実施する体制を構築した。本研究は、研究課題のうち、平成30年度「レーザー共鳴イオン化を用いた同位体存在度の低いストロンチウム90の迅速分析技術開発」について取りまとめたものである。本研究は、東京電力福島第一原子力発電所の事故で環境中に放出された主要な難測定核種の一つであるストロンチウム90を、半導体レーザーを用いた共鳴イオン化により元素かつ同位体選択的にイオン化する手法に着目し、特に海洋試料等のストロンチウム安定同位体濃度が高い実試料を対象としたストロンチウム90の迅速分析技術を開発する。

論文

Formation mechanisms of insoluble Cs particles observed in Kanto district four days after Fukushima Daiichi NPP accident

日高 昭秀

Journal of Nuclear Science and Technology, 56(9-10), p.831 - 841, 2019/09

AA2018-0262.pdf:0.88MB

 被引用回数:12 パーセンタイル:79.53(Nuclear Science & Technology)

2011年3月15日午前中に関東地方(つくば市)で観測された不溶性Cs粒子(Aタイプ)は、$$^{134}$$Cs/$$^{137}$$Cs同位体比や炉の温度状況等から、福島第一原子力発電所2号機の炉内で生成されたと考えられてきた。しかしながら、AタイプCs粒子はほぼ純粋なケイ酸塩ガラスに覆われて急冷の痕跡があること、1号機起源のBタイプCs粒子より小粒径であること等を考えると、3号機の水素爆轟(3/14, 11:01)時に、爆轟の火炎により非常用ガス処理系(SGTS)内の高性能特殊空気(HEPA)フィルタが溶融してシリカ源となり、爆風による微粒化とそれに伴う急冷が同時に起きて粒子は生成された可能性が高い。また、爆轟時の風速場から、粒子の大部分は海方向に流されたが、一部が爆風で原子炉建屋(R/B)深部に移動し、3/15未明の3号機の炉心注水再開時に発生した蒸気の流れによって再浮遊して環境中に放出されたとすることで、観測データを矛盾無く説明できる。

論文

HEPA filter clogging and volatile material release under solvent fire accident in fuel reprocessing facility

大野 卓也; 渡邊 浩二; 田代 信介; 天野 祐希; 阿部 仁

Proceedings of 25th International Conference on Nuclear Engineering (ICONE-25) (CD-ROM), 7 Pages, 2017/07

福島第一原子力発電所事故以降、重大事故に対する対応策が日本における原子力施設の認可要件として求められている。セル内溶媒火災は重大事故の一つとして定義された。溶媒が燃焼すると煤を含むエアロゾルが発生する。これらは、換気系HEPAフィルタを目詰まらせ、差圧の上昇によって破損を生じさせる可能性がある。さらに、火災は、HEPAフィルタを通過する揮発性を有するガス状の放射性物質を放出させる可能性もある。これらの現象は、施設が有する閉じ込め機能の健全性及び公衆の被ばくを評価する上で重要である。我々は、溶媒火災に伴う目詰まり挙動とエアロゾルの放出挙動及び揮発性物質の放出挙動に着目して検討を行ってきた。本報告では、最近の研究における試験データと評価結果を報告する。

論文

THALES-2によるフィルターベントシステムの有効性評価

近藤 雅裕*; 吉本 達哉*; 石川 淳; 岡本 孝司*

保全学, 15(4), p.79 - 85, 2017/01

シビアアクシデント総合解析コードTHALES-2にフィルターベントシステムを新規に導入し、軽水炉の全電源喪失事故を対象にソースターム評価を行うことにより、その有効性検討を実施した。これよりフィルターベントが環境への放射性物質の放出低減に有効であること、並びに格納容器スプレイを併用することで環境への放射性物質の放出をより低減可能であることを確認した。

論文

海洋観測に向けた海中ランドマークの生成手法

高橋 悟*; 野田 祥希*; 松田 朝陽*; 川端 邦明; 鈴木 剛*; 武村 史朗*; 小笠原 敬*; 金子 俊一*

Journal of Signal Processing, 21(1), p.15 - 24, 2017/01

地球環境の変動に伴う海洋生態系の変化を中長期的に渡り自動観測を行う装置の開発は重要である。特に、多様な海洋生態系に対して重要な役割を担うサンゴ礁は地球環境変動の影響を多大に受けていることが認知されている。本論文では、方向符号の情報量を評価する豊富度に基づき海中ランドマークの生成方法と、方向符号照合法に複数枚テンプレートマッチングかつ粒子フィルタによる海中ランドマークの位置推定を施すことにより、海中ランドマークの位置決定を行う手法を提案する。そして、海中ランドマークの時系列的な位置計測を実施した。

論文

Numerical simulation of two-phase flow behavior in Venturi scrubber by interface tracking method

堀口 直樹; 吉田 啓之; 阿部 豊*

Nuclear Engineering and Design, 310, p.580 - 586, 2016/12

 被引用回数:9 パーセンタイル:64.39(Nuclear Science & Technology)

So celled multi Venturi scrubbers systems are installed in light water reactor systems to realize filtered venting at accident. This system is composed of many Venturi scrubbers (VS) and a water pool. However, the scrubbing mechanism of the self-priming VS including effects of gas mass flow rate and shape of the VS are understood insufficiently in the previous studies. Therefore, we started numerical and experimental study to understand the detailed two-phase flow behavior in the VS. In this paper, to understand the VS operation characteristics for the filtered venting, we performed numerical simulations of two-phase flow behavior in the VS. In the first step of this study, we perform numerical simulations of supersonic flow by the TPFIT to validate the applicability of the TPFIT for high velocity flow like flow in the VS. In the second step, numerical simulation of two-phase flow behavior in the VS including self-priming phenomena. As the results, dispersed flow in the VS was reproduced in the numerical simulation, as same as the visualization experiments.

論文

Development of an altitude maintenance system for underwater robots using laser beams

田場 凌*; 武村 史朗*; Tansuriyavong, S.*; 川端 邦明; 相良 慎一*; 小笠原 敬*

Proceedings of 21st International Symposium on Artificial Life and Robotics (AROB 21st 2016) and 1st International Symposium on BioComplexity (ISBC-1) (Internet), p.395 - 399, 2016/01

In this paper, we describe about the development of real time distance measurement system for underwater robot. This system has two laser modules and a monocular camera. Two laser modules set on the monocular camera and two points always see in the camera image. If the distance of camera and the measurement object is near, the distance of two laser points is long. If the distance of camera and measurement object is far, the distance of two laser points is short. By using this relation, the distance of the robot and the measurement object can measure. In addition, this system uses particle filter to be not affected by light. We verify this method by the several experimental results.

論文

Development status of the NMR system for the polarized $$^{3}$$He Neutron Spin Filter (NSF) in the MLF at J-PARC

酒井 健二; 奥 隆之; 林田 洋寿*; 吉良 弘*; 廣井 孝介; 猪野 隆*; 大山 研司*; 大河原 学*; 加倉井 和久; 篠原 武尚; et al.

JPS Conference Proceedings (Internet), 8, p.036015_1 - 036015_6, 2015/09

$$^{3}$$Heの中性子吸収断面積が強いスピン選択性を有することを利用した偏極$$^{3}$$Heフィルターは、ビーム調整が不要なため、ビームラインに設置すれば直ぐに使える簡便な中性子スピンフィルター(NSF)として利用できる。そのようなNSF実現のためには、NSFの$$^{3}$$He偏極度${it P}$を定常的にモニタするための核磁気共鳴(NMR)システムの開発が不可欠である。我々は断熱高速通過型(AFP)とパルス型NMRの特徴が相補的であることに着目して2つのシステムを併用した汎用性の高いNMRシステムを開発した。更に、J-PARCの中性子実験装置(BL10)での中性子透過率測定から得られた${it P}$で校正しながら、温度、パルスNMRの振動磁場の大きさや印可時間などの測定条件を変えて、AFPとパルスNMRの信号間の相関を測定した。例えば、パルスNMR測定に起因する減偏極率を0.1%以下になるまでパルスNMRの検出感度を小さくしても、2つのNMR信号間の線形性は確認できた。これらの結果から、我々は開発したNMRシステムが$$^{3}$$He偏極度モニタとして十分機能することを確認した。

論文

Numerical simulation of two-phase flow behavior in venturi scrubber by interface tracking method

吉田 啓之; 堀口 直樹; 阿部 豊*

Proceedings of 2015 US-Japan Seminar on Two-Phase Flow Dynamics, 10 Pages, 2015/05

From the viewpoint of protecting a containment and suppressing the diffusion of radioactive materials in accident of nuclear power plants, it is important to develop the device which allows a filtered venting of contaminated high pressure gas. In the filtered venting system that used in European reactors, so called Multi Venturi Scrubbers System is used to realize filtered venting without any power supply. This system is able to define to be composed of Venturi Scrubbers (VS) and a bubble column. In the VS, scrubbing of contaminated gas is promoted by both gas releases through the submerged VS and gas-liquid contact with splay flow. However, the scrubbing mechanism of the VS is understood insufficiently. Therefore, we started numerical and experimental study to understand the two-phase flow behavior in the VS. In this paper, we performed numerical simulations of two-phase flow behavior in the VS by the TPFIT. In the first step, we perform numerical simulations of supersonic flow by the TPFIT to validate the applicability of the TPFIT for high velocity flow in the VS. In the second step, numerical simulation of two-phase flow behavior in the VS including self-priming phenomena. As the results, dispersed flow in the VS was reproduced in the numerical simulation, as same as the visualization experiments.

論文

Development of evaluation method of liquid flow rate by self-priming phenomena in venturi scrubber

堀口 直樹; 吉田 啓之; 金川 哲也*; 金子 暁子*; 阿部 豊*

Proceedings of 9th Korea-Japan Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS-9) (CD-ROM), 5 Pages, 2014/11

A Multi Venturi Scrubber System (MVSS) is one of the filtered venting devices, and used for existing reactors in Europe. One of the main components of the MVSS is a self-priming Venturi Scrubber (VS). It is considered that a dispersed or dispersed annular flow is formed in the VS by a self-priming phenomena. In the self-priming phenomena, the liquid was suctioned from a surrounding region to the inside of the VS. And a part of the radioactive materials in the gas are eliminated to the liquid through the gas-liquid interface of the dispersed or annular dispersed flow. Therefore, to consider the MVSS operation characteristics, it is important to evaluate the liquid flow rate of the self-priming of the VS including the occurrence condition of the self-priming. In this paper, to understand the self-priming phenomena of the VS for the filtered venting, theoretical preliminary analysis for evaluating liquid flow rate of the self-priming of the VS and experiment to observe self-priming phenomena and measure the liquid flow rare of the self-priming were performed. By comparing these results, we discussed about the mechanism of the self-priming phenomena. As a result, the self-priming phenomena in the VS was observed. In addition, at a higher gas mass flux, the suspension of the self-priming phenomena was confirmed both experimentally and theoretically.

論文

Relationship between self-priming and hydraulic behavior in venturi scrubber

堀口 直樹; 吉田 啓之; 金子 暁子*; 阿部 豊*

Mechanical Engineering Journal (Internet), 1(4), p.TEP0026_1 - TEP0026_11, 2014/08

As revealed by Fukushima Daiichi nuclear disaster, countermeasures against severe accident in nuclear power plants are an urgent need. In particular, from the viewpoint of protecting containment and suppressing the diffusion of radioactive materials, it is important to develop a device which allows filtered venting of contaminated high pressure gas. In the filtered venting system that used in European reactors, so called Multi Venturi Scrubbers System is used to realize filtered venting without any power supply. This system is able to define to be composed of Venturi Scrubbers (VS) and a bubble column. In the VS, scrubbing of the contaminated gas is promoted by both gas releases through a submerged VS and gas-liquid contact with splay flow formed by liquid suctioned through a hole provided in the throat part of the VS. This type of VS is called self-priming ones. However, the mechanism of the self-priming VS are understood insufficiently in the previous studies. In this study, to understand operation characteristics of the VS for filtered venting, we discussed the mechanisms of self-priming phenomena and hydraulic behavior in the VS. In this paper, we conduct visualized observation of the hydraulic behavior in the VS and measure the liquid flow rate in the VS for understanding self-priming. As results, it is shown that the possibility that the VS decontamination performance falls low level with no self-priming.

論文

Improvement of beam uniformity by magnetic filter optimization in a Cs-seeded large negative-ion source

花田 磨砂也; 関 孝義*; 高戸 直之*; 井上 多加志; 戸張 博之; 水野 貴敏*; 畑山 明聖*; 大楽 正幸; 柏木 美恵子; 坂本 慶司; et al.

Review of Scientific Instruments, 77(3), p.03A515_1 - 03A515_3, 2006/03

 被引用回数:24 パーセンタイル:71.57(Instruments & Instrumentation)

セシウム添加方式体積生成型負イオン源のビーム非一様性の原因究明を行うために、フィルター磁場と負イオンビームの長手方向の強度分布との相関関係について実験的に調べた。実験では、3種類のフィルター強度(49, 370, 800Gauss$$cdot$$cm)について調べた。それぞれのフィルター強度に対して、イオン源に少量のセシウム(約0.3g)を添加して、負イオン電流値を添加前よりも3$$sim$$4倍に増加させた後、ビーム強度分布を測定した。いずれのフィルター強度に対しても、ビーム強度を長手方向に積分したビーム電流値はほぼ一定であった。しかしながら、ビーム強度分布の偏差は、フィルター強度が800Gauss$$cdot$$cmの時、平均値に対して30%であったが、フィルター強度を49Gauss$$cdot$$cmに下げることにより、17%まで低減した。この結果、フィルター強度を低減することによって、ビーム電流値を下げることなく、大幅にビーム強度分布を改善できることが明らかになった。また、プローブ測定の結果、フィルター強度を下げると、プラズマ電極近傍のプラズマ密度及び電子温度は一様になっていることがわかった。これらの結果から、ビーム強度分布の非一様性の原因は、フィルター磁場によってプラズマ電極近傍のプラズマが偏在するためであることが明らかとなった。

論文

Positive and negative ion sources for magnetic fusion

Hemsworth, R. S.*; 井上 多加志

IEEE Transactions on Plasma Science, 33(6), p.1799 - 1813, 2005/12

 被引用回数:96 パーセンタイル:92.88(Physics, Fluids & Plasmas)

本論文は、磁気核融合研究に用いられる中性粒子入射装置の主要機器である、正・負イオン源に関するレビュー論文である。高プロトン比($$>$$90%),大電流密度($$approx$$2kA/m$$^{2}$$),低ガス圧運転(0.4Pa),高効率、並びにイオンの大面積一様生成といった、高い性能を同時達成するために開発されてきた正イオン源の物理をレビューする。また核融合炉用の高エネルギー中性粒子ビーム生成に不可欠となる、負イオン源開発の現状についても報告する。負イオン源開発の進展により、核融合炉用中性粒子入射装置で求められる、低ガス圧($$<$$0.3Pa)での大電流密度($$>$$200A/m$$^{2}$$)負イオン(D$$^{-}$$)生成,低引き出し電子電流といった多くの要求性能がすでに達成されている。さらに、将来の中性粒子入射装置で求められる高い性能を満足するために必要な開発項目についても言及する。

論文

Experimental study on spatial uniformity of H$$^{-}$$ ion beam in a large negative ion source

花田 磨砂也; 関 孝義*; 高戸 直之*; 井上 多加志; 森下 卓俊; 水野 貴敏*; 畑山 明聖*; 今井 剛*; 柏木 美恵子; 坂本 慶司; et al.

Fusion Engineering and Design, 74(1-4), p.311 - 317, 2005/11

 被引用回数:7 パーセンタイル:44.84(Nuclear Science & Technology)

原研10A負イオン源を用いて、JT-60U負イオン源の問題点の1つである負イオン源内の負イオン密度の空間的不均一の原因について、実験的に調べた。測定の結果、ビームの空間分布はJT-60U負イオン源同様フィルター磁場に対して垂直な高さ方向(長手方向)に非対称であり、上半分領域の強度は下半分の約60%$$sim$$80%程度であった。また、この時のプラズマ電極近傍の電子温度は高さ方向に対して均一なフィルター磁場を形成しているにもかかわらず不均一であり、上半分領域では1$$sim$$3.5eVで、下半分領域ではほぼ1eV一定であった。高速電子の軌道を計算した結果、この高い電子温度の原因はカソードから放出した高速電子がイオン源の上部壁近傍に存在する10Gauss以下の領域を通って、フィルター磁場を飛び越えて、プラズマ電極に漏れ出すためであることが明らかになった。そこで、プラズマ電極への高速電子の漏れ出しを抑制するために、計算で予測された位置に、5cm$$times$$5cmの閉止板を取り付けた。その結果、イオン源上部の電子温度は1eV程度まで減少し、上半分領域における負イオンビームの一様性も大きく改善され、20%程度ビーム電流値が増加した。本研究により、負イオン密度の不均一性の原因の一つは高速電子のプラズマ電極への漏洩であることが明らかになった。

88 件中 1件目~20件目を表示